2500 4x4 Pickup V8-360 5.9L VIN 5 Magnum (1994)
Windshield: Customer Interest
Front Door to Windshield Molding - Squeak Noise
NO: 23-36-94
GROUP: Body
DATE: Apr. 22, 1994
SUBJECT:
Front Door to Windshield Molding Squeak/Creak
MODELS:
1994 (BR) Ram Truck
SYMPTOM/CONDITION:
Squeak or creak coming from the A-Post area caused by contact between the front of the door and the plastic windshield molding.
DIAGNOSIS:
Inspect the door and windshield molding for signs of contact. If signs of contact are present, perform the repair procedure.
PARTS REQUIRED:
1
4778237
Roll - Anti-Friction Tape (contains enough for 6 vehicles)
REPAIR PROCEDURE
This bulletin involves installing anti-friction tape to the front inside edges of the doors.
1.
Remove any tape that may be present from the front inside edges of both doors and clean the area with a solvent such as MOPAR Super Kleen,
P/N 4318015.
2.
Cut two 32 inch pieces of tape from the roll. Install one section of tape to each door as shown.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
23-51-10-90
0.2 Hrs.
FAILURE CODE: AK - Squeaks