3500 4x2 Pickup L6-359 5.9L DSL Turbo (1994)
Tighten the gear cover capscrews.
Torque Value: 24 N.m [18 ft-lbs]
Remove the alignment/installation tool.
CAUTION: Always use a seal pilot when you install a seal.
Apply a bead of Loctite 277 to the outside diameter of the seal. Install the pilot from the seal kit onto the crankshaft.. Install the seal onto the pilot
and start Into the front cover. Remove the pilot.
NOTE: To prevent damage to the seal carrier, hit the alignment/installation tool alternately at the 12, 3, 6 and 9 o'clock positions.
Use the alignment/installation tool and a plastic hammer to install the seal to the correct depth.
