3500 4x2 Pickup L6-359 5.9L DSL Turbo (1994)
CAUTION:
USE A MAGNET TO MAKE SURE THE NUT AND WASHER DO NOT DROP INTO THE TIMING GEAR COVER.
22.
Repeat Steps 12 and 13 to verify that the final timing setting is correct. If the setting is not correct, repeat steps 14, 15, 16, 17, 18, 19, 20 and 21.
23.
Remove the dial indicator and adaptor from the injection pump.
CAUTION:
THE FOLLOWING INSTALLATION AND TORQUING PROCEDURE MUST BE FOLLOWED EXACTLY. IMPROPER INSTALLATION OF
THE DELIVERY VALVE WILL RESULT IN DAMAGE OR LEAKS.
24.
Install a new copper delivery valve washer, P/N 4778483, into the fuel pump.
25.
Install the delivery valve assembly on top of the sealing washer (Figure 17).
26.
Lubricate the threads and clamping surface of the delivery valve holder with a few drops of SAE 90 hypoid gear oil. Do not lubricate the copper
delivery valve washer or its seating area.
27.
Install the delivery valve holder assembly taking care not to displace the delivery valve spring, fill piece, or any shims (Figure 18).
28.
Pre-torque the holder to 40 N-m (29 lb.ft.). NEXT, IN ONE MOTION, TORQUE THE HOLDER TO 115 N-M (85 LB.FT.). (Figure 19).
