3500 4x2 Pickup L6-359 5.9L DSL Turbo (1994)
Headlight Switch: Service and Repair
1. Disconnect battery ground cable, then remove cup holder and ash tray assemblies.
2. Pry instrument cluster bezel carefully away from instrument panel to disengage clips, then unplug connectors from cigar lighter and auxiliary
power outlet.
3. Remove mounting screws from headlamp switch bezel, then remove headlamp switch and bezel.
4. Disconnect harness connectors from switch, then pull headlamp switch knob out to its full stop.
5. Depress release button on bottom of switch housing and knob and stem from switch.
6. Remove mounting screws, then switch from switch bezel.
7. Reverse procedure to install
