3500 4x2 Pickup L6-359 5.9L DSL Turbo (1994)
Throttle Cable Adjustment Components
4. Compare position of cable end to attachment stud on throttle body lever:
a. Cable end and attachment stud should be aligned (or centered on one another) to within 1 mm (0.039 in.) in either direction.
b. If cable end and attachment stud are misaligned (off center), cable will have to be adjusted as described in following adjustment procedure.
5. Reconnect cable end to attachment stud. Then with aid of a helper, observe movement of transmission throttle lever and lever on throttle body.
a. If both levers move simultaneously from idle to half-throttle and back to idle position, adjustment is correct.
b. If transmission throttle lever moves ahead of, or lags behind throttle body lever, cable adjustment will be necessary. Or, if throttle body lever
prevents transmission lever from returning to closed position, cable adjustment will be necessary.
