3500 4x2 Pickup V10-488 8.0L Magnum (1996)
2.
Remove the metering valve and discard the plastic back up plate. A metal plate is provided in the metering valve kit (P/N 4874841). Figure 1
3.
Clean the opening in the combination valve with the lint free towel supplied in the kit.
4.
Assemble the metering valve as shown in Figure 2. Make sure that the flat side of the metal back-up plate is toward the threaded plug as shown.
5.
Install the metering valve and torque to 15 ft. lbs. (20 Nm)
6.
Manually bleed both front calipers. Do not use a pressure bleeder.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
05-30-17-92
0.4 Hrs.
Install Metering Valve Kit
1995-96 (BR)(AN)
Into Brake Combination Valve
FAILURE CODE: P8 - New Part
