3500 4x2 Pickup V10-488 8.0L Magnum (1996)
Camshaft Position Sensor: Testing and Inspection
Component Testing
Fig. 8 Camshaft Position Sensor Location
The camshaft position sensor is located in the timing chain case/cover on the left-front side of the engine.
1. Disconnect the sensor connector at sensor.
Fig. 30 Sensor Connector
2. Place an ohmmeter across terminals B and C. Ohmmeter should be set to 1K-to-1OK scale for this test. The meter reading should be open (no
resistance). Replace sensor if a low resistance is indicated.