3500 4x2 Pickup V8-360 5.9L Magnum (1994)
2.
Remove two (2) screws holding the bracket assembly to grille support, then discard the bracket and screws (Figure 1).
3.
Inspect the grille-to-support brace fit to ensure that the grille does not protrude beyond the inboard surface of the support brace. If necessary,
loosen the grille adjustment screw and move the grille out until it is flush with the inboard surface of the grille support brace (Figure 2).
4.
Tighten grille adjustment screw.
5.
Install the provided bracket using two of the new screws.