3500 4x2 Pickup V8-360 5.9L Magnum (1994)
Fig. 2 Pressure Bleeding Adapter
4. Remove master cylinder cover and install suitable adapter. Various types of adapters are usually available from the pressure tank manufacturer.
5. Connect bleeder tank pressure hose to adapter.
6. Bleed master cylinder and valves. Bleed master cylinder first, combination valve second and RWAL/ABS valves third.
7. Bleed rear wheel brake units as described in manual bleeding procedure.
8. Bleed front wheel brake units. Use a clip style tool to hold metering valve in or out, or have a helper hold valve in or out by hand. Amount of valve
stem movement needed to hold valve open is quite modest. Do not use excessive force.
9. Remove pressure bleeding equipment and top off master cylinder reservoir.
10. Verify firm brake pedal before moving vehicle.
11. Repeat bleeding procedure if system warning lights come on, remain on, or if pedal is still spongy.
