3500 4x2 Pickup V8-360 5.9L Magnum (1994)
5. Remove inboard and outboard brake pads. Inboard pad has spring clip that holds it in caliper piston. Tilt pad out at top to unseat clip. Outboard
pad has retaining spring that holds it in caliper. Unseat one spring end and rotate pad out of caliper.
6. Secure caliper to convenient chassis or suspension component. Do not allow brake hose to support caliper as this will cause damage to hose
and fittings.
Installation
1. Apply a coat of suitable multi-purpose grease to slide surfaces.
2. Lubricate caliper mounting bolts, collars, bushings and bores with suitable silicone grease.
Fig. 9 Inboard Brake Pad Installation
3. Install inboard brake pad in caliper. Ensure spring clip on pad properly aligned and seated in caliper piston.
Fig. 10 Correct Brake Pad Positions
4. Install outboard brake pad in caliper. Ensure spring ends are seated in dimples in caliper.