dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission Control Systems > < NP241, Np242, NP249, Transfer Cases - Revised Parts
Page 2
background image

NOTE:

BE SURE THE FRONT OUTPUT SEAL IS SEATED BELOW THE TOP EDGE OF THE CASE BORE AS SHOWN ABOVE (FIGURE 2). THE
SEAL COULD WORK LOOSE IF NOT SEATED TO THE RECOMMENDED DEPTH.

3.

Remove oil singer from front output yoke assembly and discard.

4.

Install new smaller oil singer, P/N 4797884, on front output yolk assembly. Complete repair using the appropriate Service Manual.

POLICY: Information Only

Transmission Control Systems > < NP241, Np242, NP249, Transfer Cases - Revised Parts