3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
Crankshaft Main Bearing Seal: Service and Repair
REAR SEAL - REPLACEMENT
Preparatory Steps:
^
Remove the transmission.
^
Remove the clutch cover.
^
Remove the clutch plate.
^
Remove the flywheel.
Drill holes 180 degrees apart into the seal. Be careful not to get the drill against the crankshaft.
Use a No.10 Sheet Metal Screw and Slide Hammer Dent Puller to remove the rear seal.
REAR SEAL - INSTALLATION