3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
3. Observe that the throttle lever of the distributor pump is making contact with the low idle stop screw. Also that the spring load breakover lever has
moved oft the stop and Is against the breakover spring.
4. If the low Idle stop screw and the breakover spring Is not contacted, then the throttle actuation rod must be adjusted.
5. Hold the actuation rod flat and loosen the locking nuts.
NOTE: One nut is a left hand thread."L" marked on the flat will indicate the side of the rod with this nut.
6. The throttle actuation rod can be rotated to increase or decrease adjustments.
