3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
Double Cardan Bearing Cup & Journal Alignment
2. To install cross assembly, install one bearing cup part way into one side of yoke and turn this yoke to the bottom. Insert cross into yoke so that the
trunnion seats into bearing. Install opposite bearing cup part way. Ensure both cross journals are started straight into both bearing cups.
3. Press bearing cups, while moving cross to ensure free movement of trunnions in bearing. If any binding is felt, stop pressing and check needle
bearings to ensure needle bearings have not been trapped under ends of cross journals.
4. As soon as one retaining ring groove clears inside of yoke, stop pressing and install retaining ring.
Double Cardan Blinding Condition Relief At Point A