3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
2. Lubricate new drive shaft seal with power steering fluid, then install seal into pump housing using suitable seal installation tool or socket.
3. Install pump ring dowel pins into pump housing.
4. Install thrust plate, pump rotor and new shaft retaining ring onto drive shaft.
5. Install drive shaft subassembly into pump housing.
6. Install vanes into pump rotor.
7. Install pump ring onto dowel pins.
8. Lubricate new oil ring with power steering fluid, then install O-ring into end cover.
9. Lubricate outer edge of end cover with power steering fluid, then press end cover into pump housing.
10. Insert O-ring into groove in pump housing with ring opening near access hole in pump housing.
