3500 4x4 Pickup L6-359 5.9L DSL Turbo (1996)
Throttle Valve Cable/Linkage: Adjustments
Adjustment Procedure
1. Turn ignition switch to OFF position.
Throttle Valve Cable Attachment
2. Disconnect cable end from attachment stud on control lever.
3. Verify that transmission throttle lever is in fully closed position. Then be sure lever on injector pump is at curb idle position.
4. Locate cable lock button. Button is part of cable retainer at engine end of cable.
5. Press cable lock button inward to release cable. Lock button only has to move about 2.0 mm (0.070 in.) to release cable in adjuster head.
Throttle Cable Adjustment Components
6. Center cable end on attachment stud to within 1.0 mm (0.039 in.) and release lock button.
7. Check cable adjustment. Be sure transmission throttle lever and lever on injector pump, move simultaneously and as described in cable adjustment
checking procedure.
