3500 4x4 Pickup V10-488 8.0L Magnum (1994)
Ignition Cable: Testing and Inspection
Ignition Wire Inspection
1. Visually inspect the ignition wires for the following:
a.
Insulation for swelling or breakdown due to fuel, oil, grease or etc.
b.
Insulation for cracks or breaks.
c.
Insulator boots for swelling or breakdown due to fuel, oil, grease or etc.
d.
Insulator boots for cracks or breaks.
e.
Terminal ends for corrosion, cracks or looseness.
Ignition Wire Resistance Test
2. Using an ohmmeter, check the resistance between the terminal ends.
Minimum ..................................................................................................................................................... 250 ohms per inch (3,000 ohms per foot)
Maximum ............................................................................................................................................... 1,000 ohms per inch (12,000 ohms per foot)