3500 4x4 Pickup V10-488 8.0L Magnum (1994)
6.
Using a small screwdriver, remove the steering wheel cover cap (Figure 4).
7.
Remove the four (4) nuts attaching the air bag module (Figure 5).
8.
Remove the air bag module from the steering wheel and unplug the squib connector from the air bag module.
CAUTION:
When carrying an undeployed module, the trim cover should be pointed away from the body to minimize injury in the event of accidental
deployment. If the module is placed on a bench or other surface, the plastic trim cover should be face up to minimize movement in case of
accidental deployment.
9.
Disconnect the wire to the horn buttons.
10.
Remove the steering wheel retaining nut.
11.
Remove the steering wheel with a puller such as Snap-On CJ2OO1P or equivalent.
CAUTION:
Carefully route wiring through steering wheel to avoid wire damage.
NOTE:
