3500 4x4 Pickup V10-488 8.0L Magnum (1994)
1. Lubricate all bearings and contact surfaces with lithium base chassis grease.
2. Install bearing caps on yoke ends of rear spider and secure caps with tape.
3. Assemble socket yoke and rear spider.
4. Position rear spider in link yoke and install bearing caps. Press caps into yoke using 5/8 inch socket until bearing cap retainer grooves are exposed.
5. Install rear spider-to-link yoke bearing cap retainers.
6. Position front spider in propeller shaft yoke and install bearing caps. Press caps into yoke using a 5/8 inch socket until bearing cap retainer grooves
are exposed.
7. Install front spider-to-propeller shaft yoke bearing cap retainers.
8. Install thrust washer and socket spring in ball socket bearing bore, if removed.
9. Install thrust washer on ball socket bearing boss (located on propeller shaft yoke), if removed.
10. Align ball socket bearing boss on propeller shaft yoke with ball socket bearing bore and insert boss into bore.
11. Align front spider with link yoke bearing cap bores and install bearing caps. Press caps into yoke using a 5/8 inch socket until bearing cap retainer
grooves are exposed.
12. Install front spider-to-link yoke bearing cap retainers.
