3500 4x4 Pickup V10-488 8.0L Magnum (1994)
Front Axle Lubricant
AR
4467707
Mopar High Performance Synthetic Axle Lube (amount specified
by transfer case.)
REPAIR PROCEDURES:
This bulletin involves replacing the lubricant in the front axle, and in some cases, replacing the above listed parts in the transfer case.
FRONT AXLE LUBRICANT REPLACEMENT:
1.
Using a suction pump, remove as much axle lubricant as possible.
NOTE:
IT IS NOT NECESSARY TO REMOVE THE DIFFERENTIAL COVER.
2.
Refill the axle with Mopar High Performance Synthetic Axle Lube as specified below.
BR Truck - 4F Axle
Fill to within 1/4" of the bottom of the fill plug hole (approximately 77 ounces).
BR Truck - 6OF Axle
Fill to within 1/2" of the bottom of the fill plug hole (approximately 122 ounces).
NOTE:
OVERFILL CAN RESULT IN LUBRICANT "FOAMING" AND/OR UNIT OVERHEATING.
TRANSFER CASE COMPONENT REPLACEMENT:
1.
After completing the above front axle lubricant change, test the shifting effort.
2.
If high shifting effort or inconsistent shifting is occurring, replace the synchronizer assembly referencing Group 21 in the appropriate Service
Manual.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
21-03-01-93
(Fluid, Front Axle-Replace, 1994-1995)
0.3 Hrs.