400 L4-135 2.2L SOHC (1983)
Shift Cable: All Technical Service Bulletins
Gear Selector Assembly - Torque Revision
Models
1983 Domestic Front-Wheel Drive Models Equipped with Cable Shift System
Subject
Gear Selector Assembly Torque Revision
Index
TRANSMISSION
Date
February 21, 1983
No...
21-03-83
P-494-C
The following revisions have been made to the "torque chart" shown in the upper left-hand corner of Figure 3 on page 21-44 of the 1983 Front-Wheel
Drive Service Manual (#81-270-3003).
Letter
Torque
Old (as shown)
Revised Torque
A
No Change
B
8 N-m (70 in.lbs.)
95 N-m (70 ft.
lbs.)
C
7 N-m (60 in.lbs.)
6 N-m (55 in.
lbs.)
D
3 N-m (30 in.lbs.)
Tighten nut
finger tight + 1 turn*.
*NOTE:
Apply Loctite 242 Thread Locker or
equivalent to threads before installing nut.
Please make note of these changes in your 1983 Front-Wheel Drive Service Manual (#81-270-3003).
POLICY:
Information only