dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine - Metallic Noise/Knock on Start Up|Page 798 > < Engine - Rattle From The Front|Page 789
Page 1
background image

Timing Chain Tensioner: Customer Interest
Engine - Metallic Noise/Knock on Start Up

Models

All 1981-1984 Aries/Reliant; 1983-1984 LeBaron/"E" Class/600/New Yorker; 1983 400; 1984 Caravan/ Voyager/Ram Van Equipped With 2.6L Engine

Subject

Start Up Knock

Index

ENGINE

Date October 22, 1984

No.

09-09-84

P-4643-C
SYMPTOM/CONDITION

Metallic noise or knock sound for 1-3 seconds after engine start up, on vehicles that have not been operated for a period of four hours or longer.

NOTE:

THIS START UP NOISE IS NOT DETRIMENTAL TO ENGINE RELIABILITY. HOWEVER, THE FOLLOWING REPAIR
SHOULD BE PERFORMED IF THE NOISE IS OBJECTIONABLE TO THE CUSTOMER.

PARTS REQUIRED

1 - Spacer

PN MD084945

REPAIR PROCEDURE

The start up knock is caused by the timing chain tensioner relaxing and expelling the engine oil from the tensioner oil pressure cavity. The Rubber
Spacer, PN MD084945, is placed inside the tensioner spring to prevent excessive chain relaxation and reduces the volume of oil required to fill the
tensioner cavity.. The result is quicker oil pressurization and elimination of the start up knock.

1.

Using the appropriate Front Wheel Drive Service Manual, disassemble the engine far enough to remove the timing chain tensioner and spring.

Engine - Metallic Noise/Knock on Start Up|Page 798 > < Engine - Rattle From The Front|Page 789