400 L4-156 2.6L (1982)
FIGURE 3-A - FUEL PUMP OVERLAY HARNESS ROUTING THROUGH BODY
10.
Reconnect the body-to-instrument panel 9-way connector in the left side cowl (Figure 3-A).
FIGURE 3-C - 2 X 5 WAY INST PNL TO BODY CONNECTOR (WIRE END)
FIGURE 3-D - (TERMINAL END OF CONNECTOR)
8A. Disconnect the body-to-instrument panel 2 X 5 way wedge connector located in left-side cowl. Remove and tape back to main harness the following
wires (Figures 3-C and 3-D).
a.
Dark blue wire from cavity #3.
b.
Light blue with black tracer wire from cavity #7 (vehicles equipped with "low fuel warning" only).
FIGURE 3-D - (TERMINAL END OF CONNECTOR)
9A. Insert the two bare terminals of the overlay harness, PN 4368597, into the 2 X 5 way wedge connector as follows (Figure 3-D).
a.
Dark blue wire into cavity #3.
b.
Light blue with black tracer wire into cavity #7.
