400 L4-156 2.6L (1982)
2.
Remove the vapor return hose between the fuel pump and chassis return line. Install the Y connector/hose assembly, PN 4307397, with the curved
leg of the Y connector pointing straight up. Connect the three hoses to the fuel pump vent, reservoir vent, and chassis fuel return line using 3 hose
clamps, PN 6500650, as shown in Figure 1. Torque to 10 inch pounds.
3.
Remove the thermostat housing bolt closest to the carburetor (already removed in Step 1 if car had a reservoir) and coat threads with
Loctite/Mopar Sealant, PN 4318034. Install the reservoir assembly, PN 4307358, to the thermostat housing using the bolt just removed. Retorque
the bolt to 12 to 17 foot pounds (Figure 1A).
4.
Remove the existing hose clip on the valve cover and discard.
