400 L4-156 2.6L (1982)
FIGURE 3-B - 1982 MY ONLY BODY WIRING
NOTE:
THE LOCATOR CLIP ON THE OVERLAY HARNESS, PN 4368596 OR 4368597, WILL NOT BE USED FOR THE
WAGON APPLICATON. INSTEAD, USE THE LOCATOR CLIP ON SENDING UNIT HARNESS, PN 4331122
(FIGURE 3-B).
FIGURE 3-A - FUEL PUMP OVERLAY HARNESS ROUTING THROUGH BODY
6.
Connect the black 6-way overlay body harness connector to the black 6-way sending unit jumper harness connector. Tape connection to the V
support with a minimum of three tape wrappings around the V support. Refer to Figure 3-A for location of spot taping. (No spot taping is
required for wagon models.)