400 L4-156 2.6L (1982)
FIGURE 1-A - UNDER HOOD WIRING
3.
Route engine compartment overlay harness, PN 4304992, across the cowl and down right fender shield to coil. Secure to main engine harness
(on vehicles with harness routing as shown in Figure 1-A) with seven tie wraps, PN 6015756, evenly spaced (Figure 1-A). On vehicles where
main harness routing is different than in Figure 1-A, tie wrap overlay harness to convoluted hose harness.
NOTE:
BE SURE ANY LOOSE WIRING IN THIS AREA IS KEPT WELL CLEAR OF THE ENGINE ACCESSORY
DRIVE BELTS AND ENGINE MOUNT.
FIGURE 1-B
4.
Install the eyelet terminal of the overlay harness, PN 4304992, to the negative terminal of the ignition coil (Figure 1-B).
