dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Power Seat Motor|Locations|Page 4590
Page 1
background image

Seat Back: Customer Interest
Seat Back - Moves Backward or Forward Slightly

Models

1983, 1984 & 1985 Plymouth Reliant & Caravelle, Dodge Aries, 400 & 600, Chrysler LeBaron & New Yorker Equipped With 50/50 Seat

Subject

"Chuck" From Front Seat Back

Index

BODY

Date May 6, 1985

No..

23-13-85

P-1580-C
SYMPTOM/CONDITION

Subject vehicles may have seat backs which move backward or forward slightly (chucking) causing customer concern or discomfort.

REPAIR PROCEDURE

1.

Remove shield assembly from back of seat by removing two screws at the bottom and pulling shield down and rearward.

2.

Loosen screw which attaches the cable assembly bracket to the recliner assembly.

3.

Allow assembly to position itself. Tighten screw to 95 inch pounds. Do not pull down on cable while tightening screw.

4.

Check the seat back for "chuck" by grasping the seat back at the top and rocking it fore and aft. If "chuck" has stopped, install shield assembly.

5.

If seat back continues to "chuck" it will be necessary to replace the recliner assembly.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

23-13-45-90 . . . . . . . . . . . . .   

0.2 Hrs.

FAILURE CODE:

67 - Noisy Rattles (Loose)

All Technical Service Bulletins: > < Power Seat Motor|Locations|Page 4590