600 L4-135 2.2L SOHC (1983)
Starter Solenoid: Testing and Inspection
Bosch Starter Motors
Starter Solenoid Bench Test
Before starting any tests, ensure that battery is fully charged and that all connections are good.
1.
Disconnect field coil wire from field coil terminal.
2.
Check for continuity between solenoid terminal and field coil terminal. There should be continuity.
3.
Check for continuity between solenoid terminal and solenoid housing. There should be continuity.
4.
If there is no continuity in either test, replace solenoid assembly.
5.
Connect field coil wire to field coil terminal.
Starter Solenoid Test
Before starting any tests, ensure that battery is fully charged and that all connections are good.
1.
Connect heavy jumper wire on starter relay between battery and solenoid terminals. If engine cranks, perform starter relay test.
2.
If engine does not crank or solenoid chatters, check wiring and connectors from relay to starter for loose or corroded connections.
3.
Repeat test and, if engine still does not crank properly, repair or replace starter as necessary.
