dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ECM - No Start or Hard Start|Page 2228 > < PCM/Carburetion - Multiple Cold Start Die Outs|Page 2223
Page 1
background image

Powertrain Control Module: Customer Interest
ECM - No Start or Hard Start

Models

1985 Vehicles Equipped With 2.2L Turbocharged Engine - All Emission Packages & 2.2L EFI Engines With Federal Emission Package

Subject

No Start or Hard Start

Index

DRIVEABILITY

Date

December 9, 1985

No.

18-44-85

P-4545-C
SYMPTOM/CONDITION

A "no start" or "hard start" condition may occur in low ambient temperatures (32~ F or lower) while at altitudes of 5000 feet or higher.

DIAGNOSIS

To be sure all systems are operating as designed, use the appropriate

Driveability Test Procedure. If no problems are found, install the appropriate logic module listed below.

PARTS REQUIRED

1

Authorized Modification Label

PN 4275086

REPAIR PROCEDURE

The following logic modules have a revised start fuel schedule incorporated to lean out fuel delivery based on barometric pressure:
Logic Module No.

1985 2.2L EFI Manual - Federal Emissions

5227238

1985 2.2L EFI Automatic - Federal Emissions

5227241

1985 2.2L Turbo Manual - All Emissions

5227243

1985 2.2L Turbo Automatic - All Emissions

5227245

ECM - No Start or Hard Start|Page 2228 > < PCM/Carburetion - Multiple Cold Start Die Outs|Page 2223