600 L4-135 2.2L SOHC Turbo (1985)
FIGURE 3 - (L-BODY)
8.
From the passenger compartment, locate where the logic module wiring harness passes through the dash panel. Locate plastic kick plate for the
logic module wiring harness on the dash panel. Drill a 1/4" pilot hole 1" below the left side attachment screw of the plastic kick plate. Then drill to
a 1/2" hole (Figure 3).
9.
Attach supplied MAP sensor, PN 5227492, to bracket, PN 4324065, onto the side marked "Shelby/GLH" using supplied screws, PN 152791, and
nuts, PN 9419784 (Figure 3).
10.
Install MAP sensor bracket between inner and outer fender on passenger side. Secure with supplied screw, PN 6029513 (Figure 3).
