600 L4-135 2.2L SOHC Turbo (1985)
4. Remove hub nut, washer, wheel and tire assembly.
Driveshaft Assemblies-Remove
Inboard CV joints have stub shafts splined into the intermediate shaft on the right side of an equal length system. Driveshafts are retained in the side
gears by a constant spring force provided by a spring contained within the inboard CV joints.
1. For removal of right driveshaft, the speedometer pinion must be removed BEFORE shaft removal.
2. Remove clamp bolt securing ball joint stud into steering knuckle.