Aries L4-156 2.6L (1982)
FIGURE 8
7.
Insert the bare terminal (blue wire) from overlay harness, PN 4368642, into wiring jumper harness, PN 4209344. Install the bare terminal
from the jumper harness, PN 4209344, into cavity #14 of the fuse block (Figure 2-C).
NOTE:
SOME 1981-1982 VEHICLES MAY ALREADY BE EQUIPPED WITH JUMPER HARNESS, PN 4209344, IN
CAVITY #14 OF FUSE BLOCK. IF SO, DISCARD JUMPER HARNESS, PN 4209344, SUPPLIED IN KIT.
8.
Install 10 amp fuse, PN 6101135, supplied in kit into cavity #14 of the fuse block.
NOTE:
CERTAIN 1981-1982 VEHICLES HAVE A 6 AMP CIRCUIT BREAKER IN CAVITY #14 OF THE FUSE
BLOCK. LEAVE THE CIRCUIT BREAKER IN CAVITY #14 AND DO NOT USE THE SUPPLIED 10 AMP
FUSE.
9.
Reinstall passenger side of bulkhead connector back into dash opening. Be sure it snaps in place.