Avenger L4-2.0L DOHC (1995)
Fig 15 Stop Light Switch Reference Dimension "B"
d. Connect stop light switch electrical connector and ensure stop light is not illuminated with brake pedal unpressed, then check reference
dimension "B" as shown, distance should be 0.02-0.04 inch.
e. On models with shift lock mechanism, check adjustment of shift lock after brake pedal height has been adjusted, refer to "Automatic
Transaxles" section and adjust if necessary.
Fig 16 Brake Pedal Freeplay Dimension "c"
f.
On all models, with engine stopped, depress brake pedal two or three times to eliminate vacuum in power brake booster, then press pedal down
by hand and confirm that amount of freeplay, dimension "C", before resistance is felt is within 0.1-0.3 inch.
g. If freeplay is less than 0.1 inch, ensure clearance between stop light switch and brake pedal is within specifications.
h. If freeplay is greater than 0.4 inch, it is probably due to excessive play between clevis pin and brake pedal arm. Check for excessive clearance
and replace defective components as necessary.