Avenger L4-2.0L DOHC (1995)
Fig. 57 Timing Belt Tensioner Compression
a. Place tensioner in a suitable vise and slowly compress the plunger.
b. Index tensioner in vise the same way it is installed on engine to ensure proper pin orientation when installed on engine.
c. When plunger is compressed into tensioner body, install a pin through body and plunger to retain plunger in place until tensioner is installed.
CAUTION:
Do not loosen, remove or tighten tensioner pivot bolt. If this bolt is disturbed, entire pivot bracket assembly must be replaced.
INSTALLATION
Reverse removal procedure to install noting:
Fig. 59 Crankshaft Sprocket Alignment
1. Set the crankshaft sprocket to TDC by aligning the sprocket with the arrow on the oil pump housing.
2. Using a suitable wrench, move crankshaft to 1/2 notch before TDC.
