Avenger L4-2.0L DOHC (1995)
Dome Lamp: Description and Operation
-
Battery voltage is always applied to the dome light.
When the dome switch is turned to "ON", the dome light will remain lit. After either door is opened if the dome light switch is at "DOOR"
position, the dome light will come on.
-
When the door is closed, the timer circuit in the ETACS unit will be activate to gradually vary the voltage for Approx. 6 Seconds owing to the
duty control, and the voltage will be output to power transistor. Since the voltage applied to the dome light gradually decreases, the dome light will
be dimmed.
-
If the ignition switch is turned to "ON" while the dome light is lit (while the timer is activated), the timer circuit will be opened to turn "OFF"
power transistor.
This will immediately turn off the dome light without dimming.
