Avenger L4-2.0L DOHC (1995)
3. Set the camshaft timing marks by aligning the notches on sprockets.
Fig. 60 Timing Belt Installation
4. Install timing belt, starting at crankshaft, around water pump sprocket, idler pulley, camshaft pulleys and tensioner pulley.
5. Move crankshaft sprocket to TDC to take up belt slack.
6. Install belt tensioner to engine block but do not tighten fasteners.
7. Using a suitable torque wrench on the tensioner pulley, torque to 28 ft.-lbs.
