Avenger L4-2.0L DOHC (1995)
Main Relay (Computer/Fuel System): Testing and Inspection
MFI RELAY (ASD RELAY) AND FUEL PUMP RELAY INSPECTION
1. Remove the relay.
2. Check that there is continuity between (4) and (6) terminals.
-
Standard value: 35-75 ohms
3. Use jumper leads to connect relay terminal No. 6 to the battery (+) terminal and terminal No. 4 to the battery (-) terminal.
-
Check the continuity between relay terminals No. 2 & 8 while connecting and disconnecting the jumper lead at the battery (-) terminal.
Continuity between terminals No. 2 & 8
-
Connected
Continuity (0 ohms)
-
Disconnected
No continuity (infinite ohms)
4. If there is a defect, replace the relay.
