Avenger L4-2.0L DOHC (1995)
A/C Equipped
Inspect the alignment of the power steering pump pulley by looking at how the belt rides on the idler pulley. If the belt is riding over the edge of the
idler, the power steering pulley is out of alignment (Figure 2).
If a mis-alignment is detected, perform the Repair Procedure.
NOTE:
SEE PROCEDURE "A" FOR VEHICLES BUILT PRIOR TO SEPT. 19, 1997 OR SEE PROCEDURE "B" FOR VEHICLES BUILT BETWEEN
SEPT. 19, 1997 AND NOV. 1, 1997.
PARTS REQUIRED:
AR
MA111832
Brake Fluid Line Gasket (Use as 1 mm shim)
AR (1)
M04668223
Belt, Power Steering (Non A/C)
AR (1)
MB878687
Belt, Power Steering (A/C Equipped)
AR (1)
MR398887
Pulley, Idler
AR (1)
MR4O3O66
Bracket, Power Steering Pump
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
19-70-15-91
Bracket, Replace W/O A/C (Procedure A)
0.4 Hrs.
Labor Operation No:
19-70-15-92
Bracket/Idler, Replace W A/C (Procedure A)
0.6 Hrs.
Labor Operation No:
19-70-15-93
Bracket, Repair W/O A/C (Procedure B)
0.4 Hrs.
Labor Operation No:
19-70-15-94
Bracket, Repair W A/C (Procedure B)
0.5 Hrs.
FAILURE CODE: AM - Authorized Modification
P8 - New Part
Procedure A
(REPLACES P/S PUMP BRACKET & IDLER PULLEY WITH NEW PARTS)
1.
Remove the power steering belt using the procedures listed in the appropriate service manual.
2.
Remove the power steering pump from its bracket. Hang pump to one side.
