Avenger L4-2.4L (2009)
CAUTION: The surface around the heated/cooled cupholder Light Emitting Diode (LED) may have some remaining adhesive residue once the
indicator lens has been removed. Do not attempt to use cleaning fluids to remove any remaining adhesive as this may damage
other nearby plastic decorative surfaces or the LED itself.
2. Using a small wooden stick (1) or similar tool, remove any adhesive residue (2) from the heated/cooled cupholder indicator lens mounting surface
(3). Push the remaining adhesive into a ball of material (4) that can be easily removed and discarded.
