Avenger L4-2.4L (2009)
9. If equipped with a wheel speed sensor, remove the screw (1) fastening the wheel speed sensor head (3) in the rear of the hub and bearing (2).
Remove the sensor head from the hub and bearing.
10. Remove the four bolts (8) securing the hub and bearing (5), support plate (2), and spacer (7) to the knuckle.
11. Remove the hub and bearing (3), support plate (2), and spacer (1) as an assembly from the knuckle. Separate the spacer and hub and bearing from
the support plate once removed.
