Avenger L4-2.4L (2009)
14. Flip the shoe assembly over to show the inboard side.
15. Remove the upper shoe return spring (1).
16. Remove the adjuster (5) from the shoes and parking brake lever (2).
Installation
INSTALLATION
NOTE: Perform 1 through 21 on each side of vehicle to complete shoe set installation, then proceed to 22.
1. Lubricate shoe contact areas on support plate and anchor using Mopar(R) Brake Lubricant or equivalent.
2. Lubricate the adjuster screw threads with Mopar(R) Brake Lubricant or equivalent. Turn adjuster wheel in until it is completely seated.