Avenger L4-2.4L (2009)
NOTE: Right side drum brake shown. Left side is a mirror image.
3. Place one front shoe (6) and one rear shoe (3) inboard-side-up on a flat surface. (rear shoe has parking brake lever attached to it).
4. Install the adjuster (5), adjuster wheel toward the rear, between the two brake shoes. Make sure the wide notch in the rear fork aligns with the
parking brake lever (2).
5. Install the upper return spring (1) as shown.
6. Flip the shoe assembly over to show the outboard side.
7. Install the lever pawl (1) onto the pivot located on the rear shoe (5).
8. Install the adjuster spring (2) between the front shoe (3) and the lever pawl (1).
