Avenger L4-2.4L (2009)
Vacuum Brake Booster: Service and Repair
Power Brake Booster - Removal
GAS ENGINE
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Disconnect and isolate the battery negative cable from its post on the battery.
2. Remove the powertrain control module (PCM) mounting fasteners and move the PCM aside. See: Powertrain Management/Computers and Control
Systems/Engine Control Module/Service and Repair/Removal and Replacement/Powertrain Control Module - Removal
3. Remove the master cylinder. See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Brake Master Cylinder
- Removal
4. Disconnect the rear brake tubes (1) at the junction block (2). Install plugs at all of the open brake tubes.