Avenger L4-2.4L (2009)
1. Install the wheel speed sensor (2) head into the rear of the hub and bearing.
2. Install the wheel speed sensor head mounting screw (1). Tighten the screw to 10 Nm (89 in. lbs.).
3. Position the wheel speed sensor (3) on the trailing link and install the screw securing it in place. Tighten the mounting screw to 18 Nm (13 ft. lbs.).
4. Position the wheel speed sensor (3) and install the routing clips (4) fastening the sensor to the trailing link.
5. Position the wheel speed sensor cable routing clamp (5) on the rear suspension crossmember (6) and install the mounting screw (4). Tighten the
mounting screw to 18 Nm (13 ft. lbs.).
6. Install the speed sensor cable routing clip (3) on the outside frame rail.
7. Insert the wheel speed sensor cable (7) through the hole in the body (1) and install the grommet (2) in the hole.
