Avenger L4-2.4L (2009)
8. Install intake camshaft by raising the rear of the camshaft upward and roll the sprocket into the chain.
9. Align the timing marks (1) on the intake cam sprocket with the painted chain link.
10. Position the intake camshaft into the bearing journals in the cylinder head.
11. Verify that the timing marks (1) are aligned on both camshafts and that the timing marks (3) are facing each other and are in line with the cylinder
head cover sealing surface (2).
CAUTION: Install the front intake and exhaust camshaft bearing cap last. Ensure that the dowels are seated and follow torque sequence or
damage to engine could result.
NOTE: If the front camshaft bearing cap is broken, the cylinder head MUST be replaced.
12. Install intake and exhaust camshaft bearing caps and slowly tighten bolts to 9.5 Nm (85 in. lbs.) in the sequence shown.
