dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Timing Cover(s) - Removal|Page 1981 > < Engine Timing Cover(s) - Removal|Page 1979
Page 6
background image

27. Install the power steering hose hold down (3).
28. Install accessory drive beltSee: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and

Replacement/Serpentine Accessory Drive Belt - Installation.

29. Install power steering pump reservoir (2). Tighten mounting screw to 12 Nm (106 in. lbs.).
30. Install coolant recovery reservoir (1). Tighten mounting bolts to 10 Nm (89 in. lbs.).

31. Install clean air hose (1) and air cleaner housing (2) See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air

Cleaner Body - Installation.

32. Connect negative battery cable.

Engine Timing Cover(s) - Removal|Page 1981 > < Engine Timing Cover(s) - Removal|Page 1979