Avenger L4-2.4L (2009)
6. Remove the blend door lever (1) from the left side of the air distribution housing (2).
NOTE: To remove the blend door pivot lever, disengage the retaining tab on the lever and pull the lever straight off the pivot shaft.
7. Remove the blend door pivot lever (3) from the end of the blend door pivot shaft (4).
NOTE: It is not necessary to remove the mode door actuator from the bracket when servicing the air distribution housing.
8. Remove the three screws (1) that secure the mode door actuator (2) and bracket (3) to the right side of the air distribution housing (4) and remove
the actuator and bracket as an assembly.
9. Remove the mode door cam (1) from the right side of the air distribution housing (2).
