Avenger L4-2.4L (2009)
1. Raise and support vehicle.
2. Remove right front inner wheel splash shield.
3. Use a socket and ratchet to rotate the crankshaft clockwise.
4. While rotating the crankshaft clockwise, walk the power steering drive belt (2) off of the power steering pulley (1).
5. Remove the power steering drive belt (2).
Serpentine Accessory Drive Belt
2.0/2.4L
NOTE: When installing drive belt on the pulleys, make sure that belt is properly routed and all V-grooves make proper contact with pulley
grooves.
1. Install the accessory drive belt (2) around all the pulleys except for the generator pulley (3).
2. Using a wrench, rotate accessory drive belt tensioner (8) counterclockwise until accessory drive belt (2) can be installed on the generator pulley
(3). Release spring tension onto accessory drive belt (2).
Serpentine Power Steering Belt
INSTALLATION