Avenger L4-2.4L (2009)
Catalytic Converter: Service and Repair
Catalytic Converter - Installation
2.0/2.4L
CATALYTIC CONVERTER - 2.4L
NOTE: Always work from the front to rear of exhaust system when aligning and tightening exhaust system components.
1. Clean manifold to converter sealing surfaces.
2. Position new gasket on exhaust manifold.
NOTE: If catalytic converter is being replaced, transfer downstream oxygen sensor to new converter.
3. Loosely attach catalytic converter to exhaust manifold.
MUFFLER AND RESONATOR ASSEMBLY
