Avenger L4-2.4L (2009)
Fuel Pressure: Specifications
FUEL SYSTEM PRESSURE
Pressure Drop ................................................................................................................................................................................... Less than 10 psi / 5 min.
Volumne
1. Ignition on, engine not running.
2. With the scan tool, actuate the fuel pump.
3. Open the Flow Test Valve (1) for 20 seconds, then close the Valve.
CAUTION: Stop All Actuations.
4. Turn the ignition off.
5. Measure the amount of fuel in the Reservoir Assembly (2). The fuel output specification is ml/s Ã- 20 seconds = fuel flow in ml.
